Page 1 of 1

Drawing for latest (V4?) Filament Drive

Posted: Sat Sep 10, 2016 7:53 pm
by Lateralg
Can anyone direct me to a source for the drawing of latest (V4?) filament drive? And the slick new fan mount.

If it's at GitHub, please help me navigate to download.

Re: Drawing for latest (V4?) Filament Drive

Posted: Sat Sep 10, 2016 9:53 pm
by Jules
Single Filament Drive:
https://github.com/MakerGear/M2/blob/ma ... e%20r3.STL

Metal Motor Mount Shroud Lid:
https://github.com/MakerGear/M2/blob/ma ... d%20r2.stl

Metal Motor Mount Shroud Body:
https://github.com/MakerGear/M2/blob/ma ... y%20r2.stl

Just click the Download button and save the file. :)

Re: Drawing for latest (V4?) Filament Drive

Posted: Sat Sep 10, 2016 10:15 pm
by Lateralg
Thanks Jules, I'm part way there.

Is getting the STEP files just as easy?

Re: Drawing for latest (V4?) Filament Drive

Posted: Sat Sep 10, 2016 11:35 pm
by Jules
Yeah, just download the files of the same name from here:

https://github.com/MakerGear/M2/tree/ma ... 4%20Hotend

Re: Drawing for latest (V4?) Filament Drive

Posted: Sun Sep 11, 2016 5:05 pm
by Lateralg
Thanks again Jules.

I don't see the download button for the items in that link. Sorry to trouble y'all, but I haven't learned to speak "GitHub".

Re: Drawing for latest (V4?) Filament Drive

Posted: Sun Sep 11, 2016 5:19 pm
by Jules
I think you just right click on the link, and choose Save Link As, and then just save it as a STEP file. I've never worked with STEPs though, so don't know for sure either. ;)

Re: Drawing for latest (V4?) Filament Drive

Posted: Mon Sep 12, 2016 1:12 am
by sthone
Jules wrote:I think you just right click on the link, and choose Save Link As, and then just save it as a STEP file. I've never worked with STEPs though, so don't know for sure either. ;)
For the Step Files... first click on the link to the piece you want from that list, after it opens as a text looking file then right click on the "RAW" button then you can use "Save as" from there.