Ring light for Canon EF 100mm f/2.8L macro lens

Share your models and objects...
Post Reply
Hugs
Posts: 86
Joined: Tue Mar 08, 2016 11:16 pm
Location: Pennsylvania

Ring light for Canon EF 100mm f/2.8L macro lens

Post by Hugs » Sat Nov 19, 2016 1:20 am

It's something I've wanted for a while and had a bunch of white LEDs lying around waiting for a project.

Printed in eSun solid black PETG:
assembled.jpg
I originally planned to get a PCB made from OSHPark but it wasn't really cost-effective:
pcb.png
So I just made a 3D-printed part and point-to-point soldered the LEDs and resistors (hot glue is second only to duct tape in my "fix it fast" playbook! :D ):
wired.jpg
If anyone's interested, it's just two simple OpenSCAD files:
MacroRinglight.zip
(790 Bytes) Downloaded 53 times

3dPrintingMD
Posts: 278
Joined: Fri Oct 02, 2015 5:37 am

Re: Ring light for Canon EF 100mm f/2.8L macro lens

Post by 3dPrintingMD » Sat Nov 19, 2016 3:34 am

Nice work right there!
M2 - V4, MIC-6 Build Plate, Astrosyn Damper's(X/Y), Rev. E, Geeetech LCD

S3D - FFF Settings https://forum.simplify3d.com/viewtopic.php?f=8&t=2367
Print Quality Troubleshooting https://www.simplify3d.com/support/prin ... eshooting/

User avatar
Jules
Posts: 3150
Joined: Wed Jan 21, 2015 1:36 am

Re: Ring light for Canon EF 100mm f/2.8L macro lens

Post by Jules » Sat Nov 19, 2016 3:54 am

Most excellent! :D

Post Reply