It's something I've wanted for a while and had a bunch of white LEDs lying around waiting for a project.
Printed in eSun solid black PETG:
I originally planned to get a PCB made from OSHPark but it wasn't really cost-effective:
So I just made a 3D-printed part and point-to-point soldered the LEDs and resistors (hot glue is second only to duct tape in my "fix it fast" playbook! ):
If anyone's interested, it's just two simple OpenSCAD files:
Ring light for Canon EF 100mm f/2.8L macro lens
-
- Posts: 277
- Joined: Fri Oct 02, 2015 5:37 am
Re: Ring light for Canon EF 100mm f/2.8L macro lens
Nice work right there!
M2 - V4, MIC-6 Build Plate, Astrosyn Damper's(X/Y), Rev. E, Geeetech LCD
S3D - FFF Settings https://forum.simplify3d.com/viewtopic.php?f=8&t=2367
Print Quality Troubleshooting https://www.simplify3d.com/support/prin ... eshooting/
S3D - FFF Settings https://forum.simplify3d.com/viewtopic.php?f=8&t=2367
Print Quality Troubleshooting https://www.simplify3d.com/support/prin ... eshooting/
Re: Ring light for Canon EF 100mm f/2.8L macro lens
Most excellent!