End Stop Wire Shroud Mod & tool holder. 1st prints.

[Artenen]

I bought the M2 in December and finally had a chance to put to together this weekend and print a few things! I love it and look forward to learning more!
Finally set up

Finally set up

IMG_20140426_230339741.jpg (28.03 KiB) Viewed 15029 times

First Print was the X End Stop Wire Shroud Mod

First Print was the X End Stop Wire Shroud Mod

IMG_20140427_093948522.jpg (25.38 KiB) Viewed 15029 times

Second print was the tool holder.

Second print was the tool holder.

IMG_20140427_103746084.jpg (23.02 KiB) Viewed 15029 times

[Toby]

Congrats! They look good. I also skipped the bracelets and went right to printing something useful, but my first prints weren't anywhere as nice as that.

[Artenen]

I did what I could to have everything clean, level and used Simplify3D to check for errors and set it up right based on what I found on here, YouTube and the rest of the interwebs.

Here is my first real print today with another version set up behind it... just playing with settings, supports and code right now while I setup my stuff I designed.

IMG_20140427_145936260_HDR.jpg (29.12 KiB) Viewed 15022 times

[Toby]

cool design and nice print. I'd like to see what else you have coming off the M2.

[jimc]

haha wow how could you stand it sitting in a box from dec until now? that would drive me nuts. anyway, send and email to support because i think you may be in that few month range where your rambo needs the jumper added to it. rick will be able to tell you for sure then send you the part if necessary.

[MichaelH]

send and email to support because i think you may be in that few month range where your rambo needs the jumper added to it. rick will be able to tell you for sure then send you the part if necessary.

jimc what jumper are you talking about the USB?
I got my replacement board in may last year and was wondering why they took it of, but never bothered to ask.
I just assumed that everything is the way it should be.

Michael

[jimc]

this one. the static issue with the usb. not the power through usb/psu jumper.



https://groups.google.com/forum/#!topic ... rPFZ6a8Scw

[MichaelH]

Ok thank you