End Stop Wire Shroud Mod & tool holder. 1st prints.

Show off your prints!!!
Post Reply
User avatar
Artenen
Posts: 24
Joined: Sun Apr 27, 2014 12:37 am
Location: Sheboygan, WI

End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by Artenen » Sun Apr 27, 2014 8:08 pm

I bought the M2 in December and finally had a chance to put to together this weekend and print a few things! I love it and look forward to learning more!
Finally set up
IMG_20140426_230339741.jpg
Finally set up
IMG_20140426_230339741.jpg (28.03 KiB) Viewed 4541 times
First Print was the X End Stop Wire Shroud Mod
IMG_20140427_093948522.jpg
First Print was the X End Stop Wire Shroud Mod
IMG_20140427_093948522.jpg (25.38 KiB) Viewed 4541 times
Second print was the tool holder.
IMG_20140427_103746084.jpg
Second print was the tool holder.
IMG_20140427_103746084.jpg (23.02 KiB) Viewed 4541 times

Toby
Posts: 330
Joined: Wed Apr 09, 2014 9:44 pm

Re: End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by Toby » Sun Apr 27, 2014 8:28 pm

Congrats! They look good. I also skipped the bracelets and went right to printing something useful, but my first prints weren't anywhere as nice as that.

User avatar
Artenen
Posts: 24
Joined: Sun Apr 27, 2014 12:37 am
Location: Sheboygan, WI

Re: End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by Artenen » Sun Apr 27, 2014 9:03 pm

I did what I could to have everything clean, level and used Simplify3D to check for errors and set it up right based on what I found on here, YouTube and the rest of the interwebs.

Here is my first real print today with another version set up behind it... just playing with settings, supports and code right now while I setup my stuff I designed.
IMG_20140427_145936260_HDR.jpg
IMG_20140427_145936260_HDR.jpg (29.12 KiB) Viewed 4534 times

Toby
Posts: 330
Joined: Wed Apr 09, 2014 9:44 pm

Re: End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by Toby » Sun Apr 27, 2014 10:10 pm

cool design and nice print. I'd like to see what else you have coming off the M2.

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by jimc » Mon Apr 28, 2014 1:49 am

haha wow how could you stand it sitting in a box from dec until now? that would drive me nuts. anyway, send and email to support because i think you may be in that few month range where your rambo needs the jumper added to it. rick will be able to tell you for sure then send you the part if necessary.

User avatar
MichaelH
Posts: 40
Joined: Fri Apr 11, 2014 1:10 am
Location: Fredericton - New Brunswick - Canada

Re: End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by MichaelH » Mon Apr 28, 2014 11:23 pm

jimc wrote:send and email to support because i think you may be in that few month range where your rambo needs the jumper added to it. rick will be able to tell you for sure then send you the part if necessary.
jimc what jumper are you talking about the USB?
I got my replacement board in may last year and was wondering why they took it of, but never bothered to ask.
I just assumed that everything is the way it should be.

Michael

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by jimc » Tue Apr 29, 2014 12:10 am

this one. the static issue with the usb. not the power through usb/psu jumper.



https://groups.google.com/forum/#!topic ... rPFZ6a8Scw

User avatar
MichaelH
Posts: 40
Joined: Fri Apr 11, 2014 1:10 am
Location: Fredericton - New Brunswick - Canada

Re: End Stop Wire Shroud Mod & tool holder. 1st prints.

Post by MichaelH » Tue Apr 29, 2014 12:27 am

Ok thank you

Post Reply