drawer pulls
drawer pulls
We lost/broke two of our drawer pulls. The originals are metal, with metal pins that hook into knobs on the drawers. Printed pins wouldn't work, so I tried a screw with a captive nut arrangement. Didn't figure on the flex of the plastic: it flexes enough so that the "pins" can pull right out. I had to put nuts on the opposite end as well, which makes the captive nut a useless complication other than to provide a wider bearing surface. I'd prefer it if the hardware were better hidden, and the profile isn't a perfect match, but it was a fun exercise.
- Attachments
-
- IMG_8456.jpeg (58.17 KiB) Viewed 4111 times
-
- IMG_9749.jpeg (46.25 KiB) Viewed 4111 times
-
- IMG_6591.jpeg (123.19 KiB) Viewed 4111 times
Re: drawer pulls
nice jin! check out this place....http://www.vandykes.com....they may have something matching or similar.