Lipstick Rack

Show off your prints!!!
Post Reply
User avatar
zemlin
Posts: 457
Joined: Thu Feb 04, 2016 9:32 pm
Location: Indianapolis, Indiana

Lipstick Rack

Post by zemlin » Wed Aug 03, 2016 10:43 pm

My daughter is a cosmetologist and has more colors of lipstick than I have spools of filament. :shock:
She has an 18-cell rack and asked me if I could double that capacity for her.
I pushed the Y axis of the M2 to the limit with barely enough room to fit in a 1-outline brim.
This is eSun PETG. I used the .35 nozzle and .2mm layers. I run slow on solid infills and outline so my build times run long. This was a 42 hour build. Ran it on Kapton over glass. The edges of the print lifted the Kapton film just a little.
IMG_2292.JPG

User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: Lipstick Rack

Post by Jules » Wed Aug 03, 2016 11:22 pm

Nice print! :D

User avatar
Matt_Sharkey
Posts: 347
Joined: Mon Oct 20, 2014 3:10 pm

Re: Lipstick Rack

Post by Matt_Sharkey » Thu Aug 04, 2016 12:56 pm

my fiance just contracted me to make her a lipstick rack, I'll have to compare with your's once I get around to it. Nice work.

Post Reply