Test prints, M2 Rev E. vs M3-ID gallery

Show off your prints!!!

Test prints, M2 Rev E. vs M3-ID gallery

Postby AndyNav » Sat Oct 21, 2017 9:12 pm

I have an M2 and an M3-ID sitting right next to each other at work so I decided to print the same GCode file with each printer and see how they did. Below is a link to a short gallery of the results. I used MakerGear black PLA for both and I used Simplify3D to slice the model at 0.1mm layer height.

https://imgur.com/a/TplT2
AndyNav
 
Posts: 8
Joined: Wed Jun 29, 2016 4:03 am

Return to Printed Object Showcase

Who is online

Users browsing this forum: No registered users and 2 guests