Roman Bireme Warship

Show off your prints!!!
Post Reply
Explorer71
Posts: 27
Joined: Fri Jul 25, 2014 4:22 pm

Roman Bireme Warship

Post by Explorer71 » Wed Nov 14, 2018 7:54 pm

This is the Roman Bireme I just finished. It was printed on my M3-ID in PLA. The .stl files are available from MyMiniFactory. This was an extensive build. About a week to print all the pieces and another 3 weeks to paint it. I had to make my own oars. The oars that came with the original files had square shafts that didn't fit the round holes in the hull. The over all size is about 23 inches.
Attachments
Roman Bireme - Front.jpg
Roman Bireme - Back.jpg

User avatar
Tim
Posts: 1205
Joined: Thu Apr 10, 2014 2:19 pm
Location: Poolesville, Maryland
Contact:

Re: Roman Bireme Warship

Post by Tim » Fri Nov 16, 2018 2:26 pm

Wow. That is one fantastic build.

User avatar
rpollack
Posts: 494
Joined: Wed Apr 09, 2014 9:01 pm
Location: Beachwood, OH
Contact:

Re: Roman Bireme Warship

Post by rpollack » Tue Nov 20, 2018 4:17 pm

Wow! That is amazing work!!

Post Reply