What firmware do i re-install?

Ask the MakerGear community for assistance...
Post Reply
DeadLaine
Posts: 17
Joined: Tue Apr 28, 2015 8:52 am

Re: What firmware do i re-install?

Post by DeadLaine » Tue Apr 28, 2015 9:46 pm

okay thanks :)
Top
User avatar
insta
Posts: 2007
Joined: Tue Sep 16, 2014 3:59 am

Re: What firmware do i re-install?

Post by insta » Tue Apr 28, 2015 9:52 pm

DeadLaine wrote:I will check it whenever i get back home. i am at college at the moment. if there is no voltage what should i do? I need 3d printing to start before the end of this month for business purposes...
ffs it's april 28th
Custom 3D printing for you or your business -- quote [at] pingring.org
Top
DeadLaine
Posts: 17
Joined: Tue Apr 28, 2015 8:52 am

Re: What firmware do i re-install?

Post by DeadLaine » Tue Apr 28, 2015 11:34 pm

lol i know, just wana be ready. also i measured the ohms and it came out to 11.74m
Top
DeadLaine
Posts: 17
Joined: Tue Apr 28, 2015 8:52 am

Re: What firmware do i re-install?

Post by DeadLaine » Wed Apr 29, 2015 1:39 pm

I this morning realized i was measuring the resistance of the wrong connection... I checked the cables that connect to the thermistor and it came out to 112.24k ohms
Top
Post Reply

Return to “Tech Support”