Octoprint Printer not connecting

[dfr2923]

I have read everything and I cant figure this out. Have a M2 and it will not connect to Octoprint, I cant see the m2 in Raspberry PI lsusb either. I am running newest version of octopi. Have had a long night of trying to figure this out. Please help. I have tried rebooting raspberry PI and rebooting M2, nothing seems to work. Everthing works great hooking it up to PC running windows 8.1.

Octoprint.jpg

view of settings in octoprint

(108.25 KiB) Downloaded 188 times

[PcS]

The latest I.E. beta ? The precompiled ready to go is the easiest . Dumb question probably but I'm sure you tried rebooting the pi and your m2 ?

[dfr2923]

Thanks for the reply.

I am running Octopi 1-31-15 on a Pi. I see now there is a 7-2-15 on the mirror 2, the older ones say wheezy on them does that mean they are stable?. I am leaving for the fourth but will keep working when I get home.

I have tried rebooting everything about 10 times.

[PcS]

1 31 15 is the preferred stable version. I'm wondering if you got it on the SD card correctly ? Do you have a monitor and keyboard mouse hooked to the pi to see what is going on ?

[jsc]

Do you see an entry with 27b1:0001 in the output of lsusb? That is the RAMBo.

Are you sure you have the TTY port correct?

[dfr2923]

I do not see 27b1:0001 in the output of lsusb

Not sure what the TTY port is I only have one choice is there something I am supposed to do in the Pi before hooking up?

Have Pi running everything working except for printer, (camera and wifi)

I don't know much about Linux so any help will be appreciated.

[insta]

How many serial ports do you have in the dropdown? I remember mine were usually ACM1.

Also, our firmware has us at 250000 baud, I think ... ?

[dfr2923]

I got it working!! I had the M2 plugged into my USB hub. After trying about 100 different things I decided to try plugging straight into the pi2 and it showed up in lsusb and now works just fine. Thanks all for the help. Im sure I will be back for more help.