Bed releveling

Ask the MakerGear community for assistance...
Post Reply
jbrodzz
Posts: 10
Joined: Wed Jul 09, 2014 4:37 pm

Bed releveling

Post by jbrodzz » Fri Jul 11, 2014 5:00 pm

When I print, It seems that the left side of the bed is too high, because it makes contact with the extruder and prevents the PLA from coming out. Do you have any releveling instructions?

Thanks
Top
jereywolf
Posts: 163
Joined: Fri Apr 11, 2014 9:43 pm

Re: Bed releveling

Post by jereywolf » Fri Jul 11, 2014 5:12 pm

http://www.youtube.com/watch?v=R53wWwktH0s
Top
Post Reply

Return to “Tech Support”