Question about Z stepper motor

Ask the MakerGear community for assistance...
DrRobot
Posts: 51
Joined: Wed Aug 19, 2015 5:27 pm

Re: Question about Z stepper motor

Post by DrRobot » Thu Aug 20, 2015 4:43 pm

Matt_Sharkey wrote:
DrRobot wrote: Nice! now the machine can print something to fix itself :D
5QdBVLe.jpg
Heres a few to get you started:

Tool Holder: http://www.thingiverse.com/thing:132171
Fan Duct: http://www.thingiverse.com/thing:714000
Z holder: http://www.thingiverse.com/thing:53886
Z hardstop: http://www.thingiverse.com/thing:54014
Longer filament guide: http://www.thingiverse.com/thing:63487
Extended spool holde: http://www.thingiverse.com/thing:254796
Corner clamps: http://www.thingiverse.com/thing:602194
All of the M2 Printed parts: https://github.com/MakerGear/M2/tree/ma ... 0Parts/STL
Thanks!

DrRobot
Posts: 51
Joined: Wed Aug 19, 2015 5:27 pm

Re: Question about Z stepper motor

Post by DrRobot » Thu Aug 20, 2015 4:49 pm

jsc wrote:Check out the remix from that print, too. Tim made a nice one that snaps on.
I like the remix better!

Post Reply