M2 Rev.E Z-axis Impacts Bed, Starting Height
Posted: Sun Mar 13, 2016 5:45 am
Reference video link, https://www.youtube.com/watch?v=NNnES6b ... e=youtu.be. I executed the quick start app and performed the start height and leveling procedures successfully the first time. I have been using the printer nominally with the quick start app, Slicer and SD card (slice with Slicer and execute prints with quick start). I flashed the firmware with M2Marlin-11-30-2015. Arduino IDE reported that the upload completed and the M2 reset. I executed the starting height/level procedure with the quick start app and what you see in the linked video occurred. Please help... P.S. The manual I refer to in the video is this one, https://cdn.shopify.com/s/files/1/0030/ ... 9239265064