Bed Fan Running Constant After Completion
Posted: Tue Aug 16, 2016 2:59 am
My bed fan is running after print completion despite having the following script in the post processing section of S3D. Is there an issue with my order?
Thanks,
Jerold
Thanks,
Jerold
Code: Select all
M104 S0 ; turn off extruder
M106 S0 ; stop bed fan
M140 S0 ; turn off bed
G91 ; relative mode
G92 E0
G1 E-10 F3000
G1 Z10 ; lift 10mm
G90 ; absolute mode
G28 X0 ; home X axis
M84 ; disable motors