MakerGear Forum

hi guys .
I have a cracked mount I fixed it several times using loctite super glue but now it finish his life span .Can you direct me to the stl file so I can print it in other printer .
i found a file https://www.thingiverse.com/thing:432956 .
1)is it the a proved file ?
2) from what material you advice to print it PLA ABS or other ?
3)any special setting for print ?
I see that is a metal mount in the MakerGear site but it will cost me a lot to order it ( delivery cost ) so I keep on with printed part
Regards Doron

All the printed parts can be found HERE

I think this was the latest version of the printed mount.
https://github.com/MakerGear/M2/blob/ma ... t%20r3.STL

The originals were printed in ABS I'm not sure at what infill though. I think I use to print mine at 80% before I switched to the metal mount. (It worth every penny to upgrade)

If your going to stick with the printed one always have a backup printed before you need it.

-Steve

I have many spare metal mounts. I will send you one for $35 shipped, if you're interested.

Hi insta
I like your suggestion
please send my the way we can go on with this
Doron

http://paypal.me/pingring/35

Send me your address in the note, and I'll get everything boxed up and a label printed in the next day or so

edit: this is only guaranteed to work if you're using a V4 extruder. I'll drop a normal printed mount in there as well if I can find one -- I still have several (I believe).

It's on the way

thanks for quick help to both of you
Doron

Hi
Can you send to me package details (serial number ,carrier )
Regards Doron