M3 Printer Speed

Ask the MakerGear community for assistance...
Post Reply
Explorer74
Posts: 17
Joined: Sat Aug 26, 2017 5:02 pm

M3 Printer Speed

Post by Explorer74 » Wed Dec 27, 2017 6:47 pm

I have an M3ID. The FFF profiles for Simplify3D that MakerGear provided have a default printer speed of 3500 mm/min or 58 mm/sec. The SPEC printer speed is listed as 80 - 450 mm/sec. So the question is why are the S3D profiles set so low and what is a good number for printer speed on the M3ID?

Post Reply