MIC 6 plate and PEI

Ask the MakerGear community for assistance...

MIC 6 plate and PEI

Postby sonra » Wed Mar 21, 2018 7:55 pm

Hi guys
I try to print PLA on the MIC6 plate covered with PEI plate . till now with not great success ( the start print layer does not stick well ) .
To what temp. ( in C degrees ) do you heat the plate ?
Regards Doron
sonra
 
Posts: 53
Joined: Sat Aug 22, 2015 3:44 pm
Location: Israel

Re: MIC 6 plate and PEI

Postby Phil » Wed Mar 21, 2018 9:02 pm

Plate temperature depends on the PLA you are using. I use 45C-60C for the PLAs I print. More importantly is to ensure your bed is CLEAN; I usually wipe it with acetone or glass cleaner. Secondly, ensure you are 'squishing' your first layer enough. You may try turning your Z-axis knob one click closer.
Phil
 
Posts: 166
Joined: Mon Sep 19, 2016 7:49 pm

Re: MIC 6 plate and PEI

Postby sthone » Wed Mar 21, 2018 9:17 pm

If you bed height is correct and it's not sticking to PEI you can try scuffing the PEI surface slightly with steel wool to help with adhesion.
User avatar
sthone
 
Posts: 835
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut

Re: MIC 6 plate and PEI

Postby sonra » Fri Mar 23, 2018 4:30 pm

Thanks for help .The bed was not very leveled
Doron
sonra
 
Posts: 53
Joined: Sat Aug 22, 2015 3:44 pm
Location: Israel


Return to Tech Support

Who is online

Users browsing this forum: Baidu [Spider] and 9 guests