Strange Noise

Ask the MakerGear community for assistance...
Post Reply
Snips
Posts: 7
Joined: Mon Jan 25, 2016 1:21 am

Strange Noise

Post by Snips » Wed Mar 28, 2018 3:22 am

Hi guys,

Only recently has this started but I'm getting this strange noise from what I think is coming from the X Axis.

And also sometimes when the print starts the print bed seems to "get stuck" and not rise up.

Any and all help would be great as I'm loving the quality this machine is printing at!

I had to upload it as a zip because it wouldn't allow audio files to be uploaded, if anyone has any issues or worries I can upload it to youtube.
Attachments
Strange Noise.zip
(372.86 KiB) Downloaded 16 times

jk42
Posts: 50
Joined: Mon Oct 09, 2017 5:19 pm

Re: Strange Noise

Post by jk42 » Fri Mar 30, 2018 2:56 pm

If you run that print dry (no filament) does the sound continue?
I would also check to see if the extruder assembly seems loose at all.
~Jason from MakerGear

Snips
Posts: 7
Joined: Mon Jan 25, 2016 1:21 am

Re: Strange Noise

Post by Snips » Sat Apr 07, 2018 2:43 am

From more observations, it seems it only does it when it's doing infill and the quicker sections of the perimeter. Doesn't seem to do it on the outer perimeter when it's going slower.

Post Reply