Ghosting (Mainly on Lithopanes) HELP!

Ask the MakerGear community for assistance...
Post Reply
jcspball13
Posts: 92
Joined: Tue Jul 21, 2015 12:49 am

Ghosting (Mainly on Lithopanes) HELP!

Post by jcspball13 » Thu Aug 09, 2018 5:47 pm

Making some lithopanes for my daughter; getting severe ghosting

I tried lowering acceleration down to 1000, didnt see much change

Is there a G code command to control jerk?

This is what I have in my starting script, is this correct?

m201 x1000 y1000; Print ACC
m202 x1000 y1000; Travel Acc
m204 s1000; default acc

Does that look right?

Post Reply