Ghosting (Mainly on Lithopanes) HELP!
Posted: Thu Aug 09, 2018 5:47 pm
Making some lithopanes for my daughter; getting severe ghosting
I tried lowering acceleration down to 1000, didnt see much change
Is there a G code command to control jerk?
This is what I have in my starting script, is this correct?
m201 x1000 y1000; Print ACC
m202 x1000 y1000; Travel Acc
m204 s1000; default acc
Does that look right?
I tried lowering acceleration down to 1000, didnt see much change
Is there a G code command to control jerk?
This is what I have in my starting script, is this correct?
m201 x1000 y1000; Print ACC
m202 x1000 y1000; Travel Acc
m204 s1000; default acc
Does that look right?