Bed releveling instructions

Ask the MakerGear community for assistance...
Post Reply
Posts: 1
Joined: Wed Aug 01, 2018 10:59 am

Bed releveling instructions

Post by amberteresa » Mon Aug 13, 2018 2:54 am

When I print, It seems that the left side of the bed is too high, because it makes contact with the extruder and prevents the PLA from coming out. Do you have any releveling instructions for this situation?

thanks for any input!!

User avatar
Posts: 892
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut

Re: Bed releveling instructions

Post by sthone » Mon Aug 13, 2018 7:27 pm

Which model and version printer are you using?
See my projects at

Post Reply