changing extruder temps in official M3-ID .fff profile

Ask the MakerGear community for assistance...
Post Reply
User avatar
Umburry
Posts: 11
Joined: Fri Oct 30, 2015 3:35 pm

changing extruder temps in official M3-ID .fff profile

Post by Umburry » Thu Oct 04, 2018 3:19 am

Hello,
I saved a copy of your (MakerGear's) PLA simplify3D profile, and renamed into to something else to give me a good starting point for another material. All changed values stick in this new profile except for the extruder temp value, it always reverts back to 190! Any idea why? I can't seem to figure out how to change this and have it actually save and stick in the new copied profile.

Phil
Posts: 214
Joined: Mon Sep 19, 2016 7:49 pm

Re: changing extruder temps in official M3-ID .fff profile

Post by Phil » Thu Oct 04, 2018 2:23 pm

Did you try saving it as a new file?

User avatar
Umburry
Posts: 11
Joined: Fri Oct 30, 2015 3:35 pm

Re: changing extruder temps in official M3-ID .fff profile

Post by Umburry » Fri Oct 05, 2018 2:48 am

Yes I just tried saving it as new after I changed the temp to 230. when I open the newly saved profile its back to 190

User avatar
Umburry
Posts: 11
Joined: Fri Oct 30, 2015 3:35 pm

Re: changing extruder temps in official M3-ID .fff profile

Post by Umburry » Fri Oct 05, 2018 2:52 am

here is a download link to the file
https://drive.google.com/file/d/1ZhqVHx ... sp=sharing

if any one can actually get a temp. change to stick please tell me how! Thanks

Post Reply