settings for printing with a larger nozzle

Ask the MakerGear community for assistance...
Post Reply
zahn
Posts: 13
Joined: Thu Dec 21, 2017 10:54 am

settings for printing with a larger nozzle

Post by zahn » Sat Oct 27, 2018 2:53 am

Hi all, I'm having problems with printing large objects with the 0.75 nozzle i recently got. I have been getting very bumpy walls (See attached pic) and I know it is something with my simplify3d settings but I can't pinpoint what it is. I am printing at 900mm/min, extrusion multiplier of 0.95, extrusion width set to auto, retraction speed 6000mm/min, retraction distance 2mm. Any help would be appreciated!
Attachments
IMG_8118.jpeg
IMG_7327.jpeg
IMG_3928.jpeg
IMG_3734.jpeg
IMG_3264.jpeg

zahn
Posts: 13
Joined: Thu Dec 21, 2017 10:54 am

Re: settings for printing with a larger nozzle

Post by zahn » Sun Nov 04, 2018 3:59 am

anyone?

Post Reply