Tension check

Ask the MakerGear community for assistance...
Post Reply
makeal
Posts: 77
Joined: Sat Aug 25, 2018 2:13 pm

Tension check

Post by makeal » Thu Nov 22, 2018 2:44 am

Hello.
Happy thanksgiving!!!

I just replaced my filament drive and want to get a 2nd opinion on my tension setting

How does it look?
853240EB-4A17-43AA-B3E7-B2083E20ED53.jpeg
6A73F665-BA3A-4BA3-8925-A4C36A1D7B72.jpeg
Makergear pla black. Sorry for bad light. It’s hard to photograph it

airscapes
Posts: 594
Joined: Wed Jan 31, 2018 11:36 pm

Re: Tension check

Post by airscapes » Thu Nov 22, 2018 5:49 am

Looks a little too tight.. check this thread out viewtopic.php?f=3&t=2694

makeal
Posts: 77
Joined: Sat Aug 25, 2018 2:13 pm

Re: Tension check

Post by makeal » Thu Nov 22, 2018 2:55 pm

airscapes wrote:
Thu Nov 22, 2018 5:49 am
Looks a little too tight.. check this thread out viewtopic.php?f=3&t=2694
Thank you

Post Reply