Electric problems, please help!
Posted: Mon Sep 02, 2019 11:01 pm
Need some electrical help; had 3 m2 with v4 Extruder running when power went out. After power came back 2 are working fine, but 3rd one isn’t.
Extruder fan and pc can not running (tested both fans they are fine) Extruder will not heat up; changed both of the really small fuses in board but no changes!
Heated bed and all nema motors working fine
Help please!!
Extruder fan and pc can not running (tested both fans they are fine) Extruder will not heat up; changed both of the really small fuses in board but no changes!
Heated bed and all nema motors working fine
Help please!!