40mm pre-crimped fan connector pin not crimped correctly...

Ask the MakerGear community for assistance...
Post Reply
rixpix247
Posts: 19
Joined: Mon Apr 14, 2014 7:26 pm

40mm pre-crimped fan connector pin not crimped correctly...

Post by rixpix247 » Sat Apr 26, 2014 3:16 am

Hi Guys, just thought you would like to know that I just diagnosed the red + wire coming from the 40mm fan was not crimped correctly and caused the 40mm fan to be intermittent.

I need to know where I can purchase the fan side of that tiny connector with separate pins so I can solder them up and have a working connector again for my 40mm fan.

Thanks in advance!

jsc
Posts: 1864
Joined: Thu Apr 10, 2014 4:00 am

Re: 40mm pre-crimped fan connector pin not crimped correctly

Post by jsc » Sat Apr 26, 2014 3:26 am

Contact MakerGear.

rixpix247
Posts: 19
Joined: Mon Apr 14, 2014 7:26 pm

Re: 40mm pre-crimped fan connector pin not crimped correctly

Post by rixpix247 » Tue May 06, 2014 9:21 pm

AWESOME CUSTOMER SUPPORT!!!!!!!!!!!!!!!!!!!!!!

I now have in my hands a brand new 40mm fan with working connector!

Words cannot express my simplistic joy right now!

So, so, very glad I went with MakerGear instead of the other 'ulti' one I was considering.

THANKS KAREN, RICK @ Co. for making this decision a no-brainer choice!!!!

and a big Thanks MG forum!!

Post Reply