stringing with the standard settings

Have questions or comments about Simplify3D, Slic3r, Cura, Reptier, etc? Or wondering about which CAD software to use...discuss it here...

stringing with the standard settings

Postby Mazhdulin » Wed Jan 10, 2018 5:13 pm

Hi all,

I performed the CTRLV V3 test for the M3ID and the issue I encountered most is stringing,
Now I know I should fiddle with the retraction settings, but as I'm really new I don't know how much or which settings.
I'm using al the basic settings and PLA from makergear. 0.1mm layers. speed 50mm/s or 100mm/s not much difference there.
Can someone give an me a headstart based on the pictures of the part?:

20180109_133826.jpg

20180109_133917.jpg

20180109_133926.jpg
Mazhdulin
 
Posts: 16
Joined: Sat Oct 07, 2017 10:42 pm

Re: stringing with the standard settings

Postby sthone » Wed Jan 10, 2018 7:18 pm

Even if you do not use S3D this is a great guide for learning how to fix all the issues that may arise ... https://www.simplify3d.com/support/prin ... eshooting/
User avatar
sthone
 
Posts: 835
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut

Re: stringing with the standard settings

Postby airscapes » Mon Mar 26, 2018 1:05 am

I am about 4 days ahead of you.. I had my white PLA out using it for a few day in about 50% humidity before doing the simple string test model I found online and I has some fin strings.. Cranked the retraction speed way up and was better. I then ordered a Presto Food dehydrator and ran the pla in it over night at 140F. Reset retraction to default on S3D and all the strings were gone..
I will point you to a couple of thread I just started for set your extrude multiplier and fixing some other defects.. and some I am still working on.

If you have not gotten your layer height and extruder multiplier set correctly yet read over this and start printing single walled boxes.. I will attache a couple of slt files if it lets me
Resolved https://forum.simplify3d.com/viewtopic.php?f=8&t=9719
Still working on this one post in this forum viewtopic.php?f=7&t=6581
Post in S3D forum https://forum.simplify3d.com/viewtopic.php?f=8&t=9734
related and I am not sure if I have read it yet https://forum.simplify3d.com/viewtopic.php?f=8&t=9734

box to measure high and layer width
26x26x.4x2.stl
(1.64 KiB) Downloaded 7 times


One to verify infill (print at 100% infill)
26x26x2.stl
(28.79 KiB) Downloaded 8 times


STRING TEST PART small fast
string_test_fast_pyramid.stl
(1.64 KiB) Downloaded 8 times


M2 string test with dry PLA and stock retraction settings Simplifyed3D
dry pla string test.jpg
airscapes
 
Posts: 47
Joined: Wed Jan 31, 2018 11:36 pm


Return to Software

Who is online

Users browsing this forum: No registered users and 2 guests