Sketch plane placement
Posted: Thu May 18, 2017 6:09 am
I am having trouble moving a sketch plane. I am drawing a bearing holder. At first I put a pocket 12mm diameter all the way through. Then I do a shoulder 14mm diameter going 4mm deep. I then decided to move the recess to the center. So I want to move the sketch associated with it an bring up the Placement window, the Translation window states X-0, y=-8 and z=0. I want to move it in 4mm, so I change y to -4 and hit apply. Nothing happpens. Hit Ok, go to edit the sketch and the plane is still on the face. It didn't move. Re-enter the Placement window and y is still -8.
How do I do this.
OS: Ubuntu 16.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6707 (Git)
Build type: None
Branch: releases/FreeCAD-0-16
Hash: 5465bc47c95db45e0be85dc0e2872419efadce0f
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
tj
How do I do this.
OS: Ubuntu 16.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6707 (Git)
Build type: None
Branch: releases/FreeCAD-0-16
Hash: 5465bc47c95db45e0be85dc0e2872419efadce0f
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
tj