Anybody want to share slic3r profiles?

Have questions or comments about Simplify3D, Slic3r, Cura, Reptier, etc? Or wondering about which CAD software to use...discuss it here...
Post Reply
User avatar
insta
Posts: 2007
Joined: Tue Sep 16, 2014 3:59 am

Anybody want to share slic3r profiles?

Post by insta » Thu Jun 01, 2017 7:42 pm

Looking at you, ed.

I don't care if you have custom gcode in the start or end, I know how to kajigger it.
Custom 3D printing for you or your business -- quote [at] pingring.org

User avatar
ednisley
Posts: 1188
Joined: Fri Apr 11, 2014 5:34 pm
Location: Halfway up the Hudson
Contact:

Re: Anybody want to share slic3r profiles?

Post by ednisley » Fri Jun 02, 2017 1:17 am

insta wrote:Looking at you, ed
All I ever do is print a spool of PETG from one end to another, maybe with a few back-and-forth color changes, so I have exactly one profile that works for everything I print:

https://gist.github.com/ednisley/3e0076 ... 9a391dd332

The first three files contain settings for the printer, filament, and print, respectively. The last file is a Slic3r "config bundle", which contains a tweak for the lanyard reel (*) I made a while ago; I sometimes save a tweaked configuration during a long-running project, but I rarely make more than one of anything.

You use more different filaments than I have t-shirts, so (most likely) you already have a PETG config just like it and should write a book about filament settings. [grin]

(*) Which eventually turned out great, if you happen to like how 3D printed things look:
https://softsolder.com/2017/04/28/badge ... eel-mount/

Image

Post Reply