stringing with the standard settings

Have questions or comments about Simplify3D, Slic3r, Cura, Reptier, etc? Or wondering about which CAD software to use...discuss it here...

stringing with the standard settings

Postby Mazhdulin » Wed Jan 10, 2018 5:13 pm

Hi all,

I performed the CTRLV V3 test for the M3ID and the issue I encountered most is stringing,
Now I know I should fiddle with the retraction settings, but as I'm really new I don't know how much or which settings.
I'm using al the basic settings and PLA from makergear. 0.1mm layers. speed 50mm/s or 100mm/s not much difference there.
Can someone give an me a headstart based on the pictures of the part?:

20180109_133826.jpg

20180109_133917.jpg

20180109_133926.jpg
Mazhdulin
 
Posts: 13
Joined: Sat Oct 07, 2017 10:42 pm

Re: stringing with the standard settings

Postby sthone » Wed Jan 10, 2018 7:18 pm

Even if you do not use S3D this is a great guide for learning how to fix all the issues that may arise ... https://www.simplify3d.com/support/prin ... eshooting/
User avatar
sthone
 
Posts: 821
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut


Return to Software

Who is online

Users browsing this forum: No registered users and 3 guests

cron