Question on octoprint and M2

Have questions or comments about Simplify3D, Slic3r, Cura, Reptier, etc? Or wondering about which CAD software to use...discuss it here...
Post Reply
makeal
Posts: 77
Joined: Sat Aug 25, 2018 2:13 pm

Question on octoprint and M2

Post by makeal » Sat Aug 25, 2018 2:17 pm

Hello
I'm looking at getting M2 which doesn't come with makergear octoprint. Does makergear version of octoprint work with M2 or do I just use regular version?

airscapes
Posts: 594
Joined: Wed Jan 31, 2018 11:36 pm

Re: Question on octoprint and M2

Post by airscapes » Sat Aug 25, 2018 5:25 pm

Asked what I needed a few months ago
viewtopic.php?f=7&t=6674

I ended up with a Pi, and octopi (image of octoprint for the pi, one stop shop) Printed a case, hardwaired it as the wifi was not so good on the pi B3+ or at least the one I got for CanaKits.
Had an old monitor and usb keyboard and mouse..
Would not live without it now.. No more print stalling with windows laptop, no more moving sd card..
enclosure.jpg

makeal
Posts: 77
Joined: Sat Aug 25, 2018 2:13 pm

Re: Question on octoprint and M2

Post by makeal » Sat Aug 25, 2018 9:03 pm

Thank you I already use octopi with my anycubic i3 mega, but picking up M2 revE tomorrow so I'll just use the same octopi setup on M2

Post Reply