V4 Single Extruder Fan Shroud
V4 Single Extruder Fan Shroud
I came up with a simple fan shroud for the Single V4 extruder if anyone is interested.____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: V4 Single Extruder Fan Shroud
I wanted to mention for anyone that is considering this for an M2 equipped with the v3b, it will not fit, it hits the bed before the nozzle. Just a heads up.
Jeremy.
Jeremy.
Re: V4 Single Extruder Fan Shroud
Yeah the 3VB is a total different setup, I might be able to modify the design to fit the V3B if you haven't all ready found another one somewhere.
-Steve
-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: V4 Single Extruder Fan Shroud
Steve, I'll likely be upgrading my hot end soon here, so there's little point in making additions to the v3b setup at the moment, however thanks for the offer.
Jeremy.
Jeremy.