simplify3d v3.0
Re: simplify3d v3.0
A small window should pop up during install with a drop down list if all the printers. Are you sure you didnt just click next without reading it?
Re: simplify3d v3.0
Hmmmm, possibly. I never do one thing at a time, it's entirely possible that it was hidden behind something else that was open on my desk. Not a biggie. (But the custom scripts and things will still go away, i would think. Not a bad idea to make sure to back them up before installing.)
Re: simplify3d v3.0
I tried to download it and it wouldn't work. Gave me some generic message. Don't remember exactly but it was something like ---- Oops something's wrong
Very descriptive.
Sent support an e-mail -- waiting.
Very descriptive.
Sent support an e-mail -- waiting.
Re: simplify3d v3.0
did you upgrade your account in the link in the first post?
Re: simplify3d v3.0
Being one of those people that had problems several times I like the new online licenses thing, hopefully that will solve the downtime problem if you have to reinstall.
What happened to the import button for the processes though How do I get all my old saved ones into 3.0 now?
Edit - Never mind the buttons gone but the Import FFF feature is under the "File" Tab in the main tool bar.
-Steve
What happened to the import button for the processes though How do I get all my old saved ones into 3.0 now?
Edit - Never mind the buttons gone but the Import FFF feature is under the "File" Tab in the main tool bar.
-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: simplify3d v3.0
I exported my print profiles from the previous version but it doesnt seen to have a method for importing them into version 3.
Am I blind?
Am I blind?
Re: simplify3d v3.0
Nope! Go to File > Import to get them in.
Re: simplify3d v3.0
awesome! thanks Jules. I was expecting the option to be within the profile editor!
Re: simplify3d v3.0
yes i was expecting it to be there as well then i found it under file but they were greyed out. i then figured out that you cant have the process window open while doing it.
Re: simplify3d v3.0
Just installed S3D V3, I've got a M2 with dual V4 extruders. First off the S3D profile for dual assumes single nozzle prints will use the right nozzle when as far as I know most of us use the left - is there any way to change this default, and if there is will updates from S3D keep resetting it?