The place to discuss your hardware and software/firmware modifications...
-
Jules
- Posts: 3144
- Joined: Wed Jan 21, 2015 1:36 am
Post
by Jules » Tue Jul 28, 2015 10:35 pm
insta wrote:Jules wrote:Recommendations for wire fan guards?
I just bought a bunch of 40mm wire guards off of Amazon, they were more or less sold by the pound.
I've got like 2 dozen ... how many do you want? :p
ROFL! I swear insta, you are even worse than
i am!
Tell you what, I'll trade you a couple extra motor spacer gaskets for a couple of fan guards. (Although by the time we get finished mucking around with postage, it's likely cheaper to just order from Amazon.)
-
insta
- Posts: 2007
- Joined: Tue Sep 16, 2014 3:59 am
Post
by insta » Wed Jul 29, 2015 12:01 am
Sure I'll go for that. 2x 40mm fan guards and 1x dust-filtering 50mm fan guard for 2x motor bushings. Lets drop them in an envelope and send it with a stamp
Custom 3D printing for you or your business -- quote [at] pingring.org
-
Jules
- Posts: 3144
- Joined: Wed Jan 21, 2015 1:36 am
Post
by Jules » Wed Jul 29, 2015 12:11 am
LOL! Done! I'll PM you when the motor bushings arrive - they're EBayed, so i have no earthly idea how long they'll take to get here from China.
-
Matt_Sharkey
- Posts: 347
- Joined: Mon Oct 20, 2014 3:10 pm
Post
by Matt_Sharkey » Wed Jul 29, 2015 3:46 am
Jules wrote:they're EBayed, so i have no earthly idea how long they'll take to get here from China.
I know them feels.
-
CCVirginia
- Posts: 73
- Joined: Thu May 28, 2015 7:31 pm
Post
by CCVirginia » Wed Jul 29, 2015 6:20 pm
This sounds like you are using the bed fan for PetG - is that the case? I have been experimenting with PetG/Pet+ and have not used the bed fan at all based on other posts. Or is the extruder fan making so much of a difference?
-
Jules
- Posts: 3144
- Joined: Wed Jan 21, 2015 1:36 am
Post
by Jules » Wed Jul 29, 2015 6:54 pm
CCVirginia wrote:This sounds like you are using the bed fan for PetG - is that the case? I have been experimenting with PetG/Pet+ and have not used the bed fan at all based on other posts. Or is the extruder fan making so much of a difference?
Nope, just using the bed fan for PLA. I'm using jin's suggested method of zero fan for PETG - i did start to get some delamination issues with the fan on while using the V4.
(Odd, because the V3B seemed fine with fan, but who knows? I probably changed something in there without realizing it.)
I want the wire fan guards for quieter operation, more air flow, and because i am clinically insane, and i just can't leave the poor machine alone.
-
N5QM
- Posts: 13
- Joined: Sun Feb 22, 2015 7:59 pm
- Location: Little Rock, AR
Post
by N5QM » Wed Jul 29, 2015 7:00 pm
Jules wrote:
I want the wire fan guards for quieter operation, more air flow, and because i am clinically insane, and i just can't leave the poor machine alone.
Do the wire fan guards actually make it quieter?
Robert
MakerGear M2 (24v) - v4 Hotend - PEI Build Surface
-
insta
- Posts: 2007
- Joined: Tue Sep 16, 2014 3:59 am
Post
by insta » Wed Jul 29, 2015 7:11 pm
N5QM wrote:Jules wrote:
I want the wire fan guards for quieter operation, more air flow, and because i am clinically insane, and i just can't leave the poor machine alone.
Do the wire fan guards actually make it quieter?
A lot, actually ... the laser-cut fan guards are a worst-case scenario for airflow ... the sharp corners make a very distinct fan whine.
Custom 3D printing for you or your business -- quote [at] pingring.org
-
PcS
- Posts: 667
- Joined: Mon Mar 09, 2015 12:19 pm
- Location: Michigan
Post
by PcS » Thu Jul 30, 2015 12:22 am
I just bought the stock MG fans but removing the guards greatly improved air flow and dropped noise level.It truly is amazing.
-
lem
- Posts: 162
- Joined: Thu Jan 15, 2015 6:44 pm
Post
by lem » Thu Jul 30, 2015 4:31 am
removing the guards
I've been reading this forum for a long time.
Sorry, I can't resist.
Let me count the number of things that have been dropped into a fan..................