eSUN PETG Problem

The place to discuss filament...
Post Reply
RJD
Posts: 26
Joined: Tue Feb 23, 2016 3:18 am

eSUN PETG Problem

Post by RJD » Sat Apr 16, 2016 7:04 pm

I attempted to utilize eSUN red and blue PETG following Jules' post about eSUN black as a reference for settings, but the following picture illustrates what is happening a few minutes into the print. I have never had this problem with PLA or ABS. What is the cause and fix? Thanks.
Attachments
20160416_134147.jpg

User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: eSUN PETG Problem

Post by Jules » Sat Apr 16, 2016 10:23 pm

Looks like it jammed and stripped. Check your Filament Drive Screw tension.

viewtopic.php?f=3&t=2694

User avatar
PcS
Posts: 667
Joined: Mon Mar 09, 2015 12:19 pm
Location: Michigan

Re: eSUN PETG Problem

Post by PcS » Sun Apr 17, 2016 2:30 am

Can I ask print.speed and.nozzle temp ?

RJD
Posts: 26
Joined: Tue Feb 23, 2016 3:18 am

Re: eSUN PETG Problem

Post by RJD » Sun Apr 17, 2016 3:00 am

It seems the problem is fixed, but will print some more tomorrow to make sure. I adjusted temp on extruder, slowed down the speed, and adjusted drive screw tension, so essentially trial and error. Thanks.

Post Reply