MIC6 preorder number 3 *back for sale*
MIC6 preorder number 3 *back for sale*
Previous thread: viewtopic.php?f=10&t=3970
They end up $106-113ish shipped -- MIC6 with PEI. Both exposed surfaces (the top of the PEI and the bottom of the MIC6) will have the protection films on them -- you get the pleasure of peeling those back to reveal the mirror glossy surface underneath (rather than them getting scratched up in shipping).
How to preorder:
Reply saying "I'm interested in <qty>". I'll add you to my total -- when we hit 12-15, I order the giant industrial sheets of metal, process them, and get them to you via USPS. They work on all M2s (including Rev E) -- but you will have to change your Z height. They just barely do NOT work with inductive probes, the PEI I use is too thick.
BUY LINK: http://pingring.org/parts-hardware/ First come, first serve. Posting interest does NOT guarantee you a plate!
They end up $106-113ish shipped -- MIC6 with PEI. Both exposed surfaces (the top of the PEI and the bottom of the MIC6) will have the protection films on them -- you get the pleasure of peeling those back to reveal the mirror glossy surface underneath (rather than them getting scratched up in shipping).
How to preorder:
Reply saying "I'm interested in <qty>". I'll add you to my total -- when we hit 12-15, I order the giant industrial sheets of metal, process them, and get them to you via USPS. They work on all M2s (including Rev E) -- but you will have to change your Z height. They just barely do NOT work with inductive probes, the PEI I use is too thick.
BUY LINK: http://pingring.org/parts-hardware/ First come, first serve. Posting interest does NOT guarantee you a plate!
Custom 3D printing for you or your business -- quote [at] pingring.org
-
- Posts: 28
- Joined: Thu Mar 24, 2016 1:01 am
Re: MIC6 preorder number 3
I'm interested in qty 1
Thanks Insta!
Thanks Insta!
Re: MIC6 preorder number 3
Crap. I got busy with work / vacation and completely forgot about this.
I'm interested in 2 please.
/wanders off to set a weekly reminder to check forums...
I'm interested in 2 please.
/wanders off to set a weekly reminder to check forums...
Re: MIC6 preorder number 3
I'm interested in qty 1
Re: MIC6 preorder number 3
I am interested in 1.
Re: MIC6 preorder number 3
I'm interested in one WITHOUT the PEI. They can have my inductive probe when they pry it from my cold dead hands. Also I have never really had any issue with hairspray getting stuff to stick.
These are the thick MIC6 plates correct?
These are the thick MIC6 plates correct?
Re: MIC6 preorder number 3
Yeah, and I actually have one without the PEI already.
In fact I can give you a discount if you are OK with it being a bit skinny (about 2mm off each side on the X axis). Already bead-blasted too ...
In fact I can give you a discount if you are OK with it being a bit skinny (about 2mm off each side on the X axis). Already bead-blasted too ...
Custom 3D printing for you or your business -- quote [at] pingring.org
-
- Posts: 6
- Joined: Sat May 02, 2015 7:35 am
- Location: VA
Re: MIC6 preorder number 3
I'll take quantity of One.
Just need your PayPal address, and are you on Twitter?
Just need your PayPal address, and are you on Twitter?
Re: MIC6 preorder number 3
I am ok with losing 4mm of X axis as long as I can compensate for the smaller bed with the replacement corner mounts I believe you designed. Hit me up with a PM if you like rather than discussing it and hijacking this thread.insta wrote:Yeah, and I actually have one without the PEI already.
In fact I can give you a discount if you are OK with it being a bit skinny (about 2mm off each side on the X axis). Already bead-blasted too ...