Bed releveling instructions

Ask the MakerGear community for assistance...
Post Reply
amberteresa
Posts: 1
Joined: Wed Aug 01, 2018 10:59 am

Bed releveling instructions

Post by amberteresa » Mon Aug 13, 2018 2:54 am

When I print, It seems that the left side of the bed is too high, because it makes contact with the extruder and prevents the PLA from coming out. Do you have any releveling instructions for this situation?

thanks for any input!!

User avatar
sthone
Posts: 897
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:

Re: Bed releveling instructions

Post by sthone » Mon Aug 13, 2018 7:27 pm

Which model and version printer are you using?
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com

Post Reply