M2 E Max Temp Err

Ask the MakerGear community for assistance...
Post Reply
mlr53
Posts: 25
Joined: Thu Jun 09, 2016 6:31 pm

M2 E Max Temp Err

Post by mlr53 » Thu Aug 30, 2018 2:06 pm

Looking for help on this one. My M2 E starting throwing an error message of "Max Temp" and then shutting down part way thru laying the raft. What do I look for to fix this issue?

mlr53
Posts: 25
Joined: Thu Jun 09, 2016 6:31 pm

Re: M2 E Max Temp Err

Post by mlr53 » Thu Aug 30, 2018 2:07 pm

None of the plastic laid on the bed looks to be overheated. No sign of over temp other than the err message and the printer shuts down.

User avatar
ednisley
Posts: 1188
Joined: Fri Apr 11, 2014 5:34 pm
Location: Halfway up the Hudson
Contact:

Re: M2 E Max Temp Err

Post by ednisley » Thu Aug 30, 2018 2:17 pm

mlr53 wrote:
Thu Aug 30, 2018 2:07 pm
throwing an error message of "Max Temp"
Order a new extruder thermistor, install it, recalibrate the initial Z offset, and you're done.

Search the forums for +max +temp (the + signs require the word to appear, as quoted strings don't work the way I expect) and you'll find plenty of discussions, with answers to all of the questions you're about to ask. [grin]

Post Reply