Here's a project I just backed, claiming 40-50 mm/sec feed rates. I didn't do any research beyond the kickstarter page. Anyway there are still some 1kg spools for $30 available. Shipping only to US though.
https://www.kickstarter.com/projects/ze ... g-filament
Flexible filament on Kickstarter
Re: Flexible filament on Kickstarter
I haven't bought a printer yet but this looks like it would be cool for printing tank treads like they show. I'll be keeping an eye on this one so when I do get a printer finally this will be on the list of things to try.
-Steve
-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: Flexible filament on Kickstarter
I've got three spools of Polymakr filament from a Kickstarter campaign coming soon...hopefully...including flexible. The Zen filament is tempting too. Seems like there has been an explosion of different FFF filament types and manufacturers over the last 6 months or so.
Re: Flexible filament on Kickstarter
Yeah, not to mention a new sub $400 3D printer every other day on Kickstarter or Indiegogo. Except in that case they all seem to be hiding performance problems.Dave K wrote:I've got three spools of Polymakr filament from a Kickstarter campaign coming soon...hopefully...including flexible. The Zen filament is tempting too. Seems like there has been an explosion of different FFF filament types and manufacturers over the last 6 months or so.
Re: Flexible filament on Kickstarter
It's not clear to me from the Kickstarter page why this filament might be better than ecoflex or ninjaflex. On the face of it, it's just another manufacturer making flexible filament. Maybe I didn't read in-depth enough. There was a really interesting page on what sort of filament drives are good for printing flexible filament, with the strong suggestion that you should have a spring-loaded filament drive (they have pictures) that will keep a constant pressure on the filament. I'm not sure how much practical difference there is between a spring-loaded feed and a tensioner screw, but they seem to think it makes a big difference. E3D, on the other hand, seems to think that the key is to keep the filament in a teflon tube including having a second piece of tubing going from the bottom of the extruder gear down into the top of the hot-end. At any rate, I'm doubtful that you'll get any faster printing out of this filament than any other flexible filament on whatever extruder setup you have. Although that reminds me that I was going to get some ecoflex or ninjaflex and see how it works with the E3Dv6 hot-end. . .
Re: Flexible filament on Kickstarter
I don't know much about this stuff, I actually bought this off KS before I even had a printer. Anxious to try this flex stuff out I drew up a quick wheel/tank thread thingamabob to see how this worked. Besides the note to run this stuff at about 240 I just used the PLA medium setting in S3D and after a quick search of what works with Ninjaflex I ran the bed at 40 degrees and printed on blue painters tape. As flexible as this was off the reel I fully expected this stuff to give me feed issues or just clog my nozzle but figured what the hell let see what happens. If fed right into the extruder without any problems and the first layer went down just fine.
15 minutes in and its not looking too bad.
The finished print came out better than I would have ever expected for a first try. (I still can't believe how awesome and easy the M2 is to use.)
I wasn't sure what to expect only printing with PLA and ABS but the finished product is pretty flexible, I think with a few tweaks and some practice it will work for tank tracks and other bendable like things like belts too. This definitely opens up some cool possibilities. Thanks Toby for originally posting this.
-Steve
Last edited by sthone on Thu Oct 30, 2014 3:03 pm, edited 1 time in total.
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: Flexible filament on Kickstarter
thats cool. did it have any indication that it wanted to start curling or peeling up? i use ecoflex and its the same thing where i have never had a feed issue but it does like to shrink as it cools so it like to peel up in corners.
Re: Flexible filament on Kickstarter
I didn't see any indications of it trying to peel but that might just be because it was a pretty simple part to try and print. I really didn't have a need for this stuff when I bought it but it looked cool so I wanted to try it, hopefully this weekend I will find some other parts to try and print to really test this stuff out.
-Steve
-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: Flexible filament on Kickstarter
-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com