Getting a "Simplify 3D has stopped working" When slicing.
- JohnnyRobot
- Posts: 128
- Joined: Tue Apr 22, 2014 9:25 pm
Getting a "Simplify 3D has stopped working" When slicing.
Hey all,
I'm getting a "Simplify 3D has stopped working" windows error message when trying to slice this file.
It must be rotated -90*
https://onedrive.live.com/?cid=FB6F7A8F ... 1D7%212644
Could someone else try it to see if it's the file, or my S3D settings?
I'm getting a "Simplify 3D has stopped working" windows error message when trying to slice this file.
It must be rotated -90*
https://onedrive.live.com/?cid=FB6F7A8F ... 1D7%212644
Could someone else try it to see if it's the file, or my S3D settings?
╒═════════════════════════════════════════════════════════╕
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
Re: Getting a "Simplify 3D has stopped working" When slicing
Meshlab reports a bunch of self-intersecting faces, plus non-manifold edges and vertices, so perhaps S3D can't cope with the geometry.
Slic3r takes a while to chew through it, but the output looks OK with http://gcode.ws.
I didn't try adding supports, which it will certainly need to be printable!
Slic3r takes a while to chew through it, but the output looks OK with http://gcode.ws.
I didn't try adding supports, which it will certainly need to be printable!
Re: Getting a "Simplify 3D has stopped working" When slicing
i just did it and it sliced great in about 10 sec flat. look in your support settings and be sure your pillar resolution isnt set really low. default is 4mm but normal range is from maybe 2-4. when you get real small, under 1mm it can take a really long time and cause possible errors.
Re: Getting a "Simplify 3D has stopped working" When slicing
ed after your meshlab report i sliced it again which s3d did no problem but i do see evidence of mesh errors in the one hole
- JohnnyRobot
- Posts: 128
- Joined: Tue Apr 22, 2014 9:25 pm
Re: Getting a "Simplify 3D has stopped working" When slicing
Strange... Still no luck for me.
I've even tried disabling support material.
I've even tried disabling support material.
╒═════════════════════════════════════════════════════════╕
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
- JohnnyRobot
- Posts: 128
- Joined: Tue Apr 22, 2014 9:25 pm
Re: Getting a "Simplify 3D has stopped working" When slicing
Hey jimc,
May I please have a copy of the fff file you're using to slice?
I'd like to compare.
Thanks
May I please have a copy of the fff file you're using to slice?
I'd like to compare.
Thanks
╒═════════════════════════════════════════════════════════╕
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
Re: Getting a "Simplify 3D has stopped working" When slicing
sure thing. here it is. i was using my .15abs profile for the e3d.
- JohnnyRobot
- Posts: 128
- Joined: Tue Apr 22, 2014 9:25 pm
Re: Getting a "Simplify 3D has stopped working" When slicing
Well,
The fff file you provided did the same thing.
After much messing around with settings, I upgraded to 2.1.1 and it solved the problem!
The fff file you provided did the same thing.
After much messing around with settings, I upgraded to 2.1.1 and it solved the problem!
╒═════════════════════════════════════════════════════════╕
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
-- Hi! No signature here.
╘═════════════════════════════════════════════════════════╛
Re: Getting a "Simplify 3D has stopped working" When slicing
oh yes if you werent on the new version then thats a problem. last update was almost all bug fixes.