M2 model

General discussion topics
Post Reply
jjl1
Posts: 4
Joined: Mon Jul 10, 2017 9:56 pm

M2 model

Post by jjl1 » Thu Jul 13, 2017 2:30 pm

Does anyone out there have a model of the M2? I am going to design an enclosure and It would be helpful to have a model.

User avatar
sthone
Posts: 874
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:

Re: M2 model

Post by sthone » Thu Jul 13, 2017 6:58 pm

You can try this thread maybe?

Not sure if it's exactly what your looking for though.

-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com

wmgeorge
Posts: 194
Joined: Thu Jun 18, 2015 1:09 am

Re: M2 model

Post by wmgeorge » Thu Jul 13, 2017 10:07 pm

jjl1 wrote:Does anyone out there have a model of the M2? I am going to design an enclosure and It would be helpful to have a model.
So if someone had a model or a real M2 where are you located and do you plan on seeing it in person? There are dimensions published on the website over on MakerGear and more than likely here someplace. But what the Zombie linked too should work.
Retired Master Electrician, Commercial HVAC/R,CNC Router, MakerGear M2...and more.

jjl1
Posts: 4
Joined: Mon Jul 10, 2017 9:56 pm

Re: M2 model

Post by jjl1 » Fri Jul 14, 2017 3:15 am

thanks sthone,

That could work.

Post Reply