Bed trying to move too far to the rear

Ask the MakerGear community for assistance...
Post Reply
Vindic8
Posts: 2
Joined: Thu Aug 22, 2019 7:16 pm

Bed trying to move too far to the rear

Post by Vindic8 » Thu Aug 22, 2019 7:41 pm

I got an M2 for my son. Initial setup went well, using Simplify3D. He printed out several things from thingiverse with no issues. 15 to 20 prints no issues. Recently the unit started making a noise when the bed is starting a print. When the bed moved to the rear it appears that it is trying to move further then the allotted distance. It makes a grinding noise when this happens. Any advice would be appreciated.

https://photos.app.goo.gl/LsxCvEeV4x5x9Gbz9

Thanks,
Bill

Vindic8
Posts: 2
Joined: Thu Aug 22, 2019 7:16 pm

Re: Bed trying to move too far to the rear

Post by Vindic8 » Thu Aug 22, 2019 8:49 pm

I found a piece of a print (very hidden) trapped along the rail preventing the Y-Axis end-stop from being triggered.

Appears to have been the issue.

airscapes
Posts: 358
Joined: Wed Jan 31, 2018 11:36 pm

Re: Bed trying to move too far to the rear

Post by airscapes » Thu Aug 22, 2019 9:29 pm

Love when the fix is simple!

Post Reply