Search found 180 matches

by CCRN
Thu Aug 27, 2020 9:35 pm
Forum: M2 Dual Extruder
Topic: Tool Offset M218
Replies: 2
Views: 7012

Re: Tool Offset M218

Thank you. My offset was off a bit after changing nozzles, say by 0.3 mm so there was a gap in my test prints. I thought there was a way to store the offset in the eeprom with gcode, but support said it is hard coded in the configuration.h file and to change it there or in the slicer.
by CCRN
Thu Aug 13, 2020 11:50 pm
Forum: M2 Dual Extruder
Topic: Tool Offset M218
Replies: 2
Views: 7012

Tool Offset M218

Hello,

I am recalibrating my dual M2 and I am running into a problem. I can update the tool offset via gcode, but it does not persist. Is this something that can be written to the rambo and persist through power cycles, or is it intended for a starting script?

Thanks,
Jerold
by CCRN
Sun Feb 03, 2019 5:03 pm
Forum: Tech Support
Topic: Firmware Origin Dual
Replies: 1
Views: 1818

Firmware Origin Dual

Hello, I checked my printer firmware origin today to see if 0,0,0 is in a printable area of the bed. I used the following G-Code G28 G1 X0 Y0 Z0 F3000 The results shows the print head off the bed and in the corner of the clip area. I suspect this is due to the roughly 31.1 x offset for a dual extrud...
by CCRN
Wed Jan 30, 2019 4:55 pm
Forum: Modifications
Topic: Flexible Magnetic Print System for Maker Gear
Replies: 14
Views: 9422

Re: Flexible Magnetic Print System for Maker Gear

+1 for my M2 if you move forward.
by CCRN
Wed Jan 30, 2019 2:58 pm
Forum: General Discussion
Topic: Simplify3D M2 Dual - Single Extruder Issue
Replies: 3
Views: 2995

Re: Simplify3D M2 Dual - Single Extruder Issue

If this is not something that the user can fix in the settings, does this mean that Makergear accepts this representation of a Dual M2? Wondering why it hasn't been addressed. Dual Extruder M2 machines are not a new product.
by CCRN
Sun Jan 27, 2019 6:41 pm
Forum: General Discussion
Topic: Simplify3D M2 Dual - Single Extruder Issue
Replies: 3
Views: 2995

Simplify3D M2 Dual - Single Extruder Issue

Good Morning!, I am still chugging along with my M2 and was wondering if there is a solution to an issue I am having. I have a dual extruder on my printer that puts the left extruder off center when compared to an M2 Single. I usually print with the left extruder when printing one color. Simplify3D ...
by CCRN
Sun Aug 12, 2018 4:05 pm
Forum: Software
Topic: S3D Slicing Issue
Replies: 4
Views: 5082

Re: S3D Slicing Issue

airscapes wrote:
Fri Aug 10, 2018 3:54 am
First go to repair and check the model for errors
Next if these are thin walls, go to advance tab and turn set allow single extrude wall and allow single extrude infill and then slice
This fixed my slice. Thanks!
by CCRN
Sun Aug 12, 2018 3:28 pm
Forum: Software
Topic: S3D Slicing Issue
Replies: 4
Views: 5082

Re: S3D Slicing Issue

Checked for errors and did not find any. Not seeing the thin wall settings in settings in Advanced except for only use perimeters for thin walls. I tried that and it did not help. Just did an update check on my computer and realized it is using an outdated S3D. Downloading now. Screen Shot 2018-08-1...
by CCRN
Fri Aug 10, 2018 1:45 am
Forum: Software
Topic: S3D Slicing Issue
Replies: 4
Views: 5082

S3D Slicing Issue

I pulled up an old stl I created from OpenSCAD and when I am slicing it in the latest Mac version, the output shows perimeters missing. The results are not right and I am not sure what is going on. Would someone mind taking a look a the STL?. It slices fine in Slic3r, just not in S3D. Screen Shot 20...
by CCRN
Sun Aug 13, 2017 9:14 pm
Forum: Tech Support
Topic: Hotend Cooling Down During Print
Replies: 4
Views: 4168

Hotend Cooling Down During Print

Hello, Last night my M2 left hot end starting to show a symptom of cooling off a few minutes after the print started. I figured it was the thermistor, but changing it did not help. I tried a completely different hot end and it still has this issue. What is odd is that once I stop the print, the hot ...