Search found 22 matches
- Wed Dec 07, 2022 4:08 pm
- Forum: Filament
- Topic: Seam on PETG parts
- Replies: 3
- Views: 10673
Seam on PETG parts
In the past, I have only printed PLA. My M3-ID has always printed it great with very little tweaking. I know, its the easy stuff.... I have started using some black PETG for some parts. I've got the temperature where I'm getting good adhesion and stringing is manageable for these parts at 235. Howev...
- Sat Nov 20, 2021 6:47 pm
- Forum: How-to/Guides/Tips
- Topic: Order of dual color printing
- Replies: 1
- Views: 11748
Order of dual color printing
I am attempting my first dual color printing with M3-ID. I want to make a flat plate with lettering. Similar look to an engraved panel where the letters have been color filled. I have most of it figured out and have each nozzle printing the correct part. I have T0 printing the engraved plate with le...
- Sat Nov 20, 2021 6:20 pm
- Forum: Getting Started
- Topic: Favorite way to prep your bed surface for printing PLA?
- Replies: 37
- Views: 142696
Re: Favorite way to prep your bed surface for printing PLA?
Was reading the dated post and was interested in something like the zebra-plate described. Link is not active any more. Anyone know of something similar or better?
- Sat Nov 20, 2021 6:20 pm
- Forum: Getting Started
- Topic: Favorite way to prep your bed surface for printing PLA?
- Replies: 37
- Views: 142696
Re: Favorite way to prep your bed surface for printing PLA?
Was reading the dated post and was interested in something like the zebra-plate described. Link is not active any more. Anyone know of something similar or better?
- Thu Oct 21, 2021 12:01 am
- Forum: Tech Support
- Topic: Bed Dropping
- Replies: 1
- Views: 6652
Bed Dropping
I am having issues with the bed dropping during a print and creating a bird nest. I have an early M2 and it was a reliable workhorse for years. No issues. A little over a year ago, I did a major upgrade to all current hardware and firmware. Not long after that, this issue started. I worked with Garr...
- Thu Jun 28, 2018 5:13 pm
- Forum: How-to/Guides/Tips
- Topic: PETG fff
- Replies: 3
- Views: 10037
PETG fff
Would someone who is successfully printing with PETG mind sharing their fff? I saw a post in 2015 but was wondering if things have evolved.
Much appreciated.
Much appreciated.
- Tue Nov 15, 2016 12:19 am
- Forum: Filament
- Topic: Fliament for outdoors
- Replies: 9
- Views: 12493
Re: Fliament for outdoors
Thanks a lot.... I've ordered some PETG
- Fri Nov 11, 2016 3:50 am
- Forum: Filament
- Topic: Fliament for outdoors
- Replies: 9
- Views: 12493
Re: Fliament for outdoors
thanks
- Fri Nov 11, 2016 12:55 am
- Forum: Filament
- Topic: Fliament for outdoors
- Replies: 9
- Views: 12493
Re: Fliament for outdoors
Thanks for the feedback.
I'll look into the PETG. These are fairly large parts. 4" x 4" x 1" approximately.
Jules, I've been out of the loop for a while. What is "insta"?
I'll look into the PETG. These are fairly large parts. 4" x 4" x 1" approximately.
Jules, I've been out of the loop for a while. What is "insta"?
- Thu Nov 10, 2016 2:46 pm
- Forum: Filament
- Topic: Fliament for outdoors
- Replies: 9
- Views: 12493
Fliament for outdoors
I purchased my M2 in 2013 and was very active for several years with PLA. The M2 has been an incredible little tool; very well made and essentially no issues. I have been away from it now for several months and configuration is a bit fuzzy in my mind. :D All my previous printing was in PLA. I need t...