This site has more M2 parts than Makergear had.. No rails but bearings and other parts.
https://www.partsbuilt.com/parts-makergear/
Search found 594 matches
- Sat Oct 22, 2022 2:53 pm
- Forum: Tech Support
- Topic: Linear motion components overhaul
- Replies: 2
- Views: 11489
- Sat Oct 22, 2022 2:35 pm
- Forum: Tech Support
- Topic: Linear motion components overhaul
- Replies: 2
- Views: 11489
Re: Linear motion components overhaul
Just checked the website and the bearings are still available as well as the X rail Unless you really let the maintenance go, I would think the rails should be fine.. Not sure about Z but would hop the bearing would wear before the rod.. If you don't get a response, and do figure it out, post your p...
- Fri Oct 14, 2022 10:53 pm
- Forum: Modifications
- Topic: Bondtech QR - Extruder
- Replies: 9
- Views: 26959
Re: Bondtech QR - Extruder
I also have made a different spool holder that uses bearing. These parts were all designed for and printed with a .75 nozzle so not sure how well they will work with a .5 or .35 Since I use a .8 Extrusions width with the .75 and designed to that a.35 may with an EW of .4 would probably be best if th...
- Fri Oct 14, 2022 9:44 pm
- Forum: Modifications
- Topic: Bondtech QR - Extruder
- Replies: 9
- Views: 26959
Re: Bondtech QR - Extruder
Sorry, meant to attach the factory file, but let me fine the stl and the factory.. had to zip them to attach These should print with ABS no problem if if you have simplified 3d to import them. Tension adjust is still very sensitive and a gravity feed setup for is kind of a must. No matter what you w...
- Sat Oct 01, 2022 5:00 pm
- Forum: Modifications
- Topic: Bondtech QR - Extruder
- Replies: 9
- Views: 26959
Re: Bondtech QR - Extruder
This drive is on thingivers and I have used it for a while now. With careful tension adjustment and gravity feed spool holder and a larger nozzle it can do TPU
- Sun Aug 21, 2022 7:11 pm
- Forum: Filament
- Topic: Filament suggestions for outdoor use, that doesn't need a heated print enclosure?
- Replies: 5
- Views: 52349
Re: Filament suggestions for outdoor use, that doesn't need a heated print enclosure?
PETG is much better than PLA for heat and it is a bit more flexible without breaking. I have surveillance camera mounts I designed, which are outside in full sun, east coast summer/winter, going on 4 years now, no issue.
- Sun Aug 14, 2022 3:52 am
- Forum: General Discussion
- Topic: M2 hotend question about new one
- Replies: 1
- Views: 11746
Re: M2 hotend question about new one
yep, new hot end has everything.. nozzle, heater, thermistor, barrel..
- Fri Jun 24, 2022 9:36 pm
- Forum: How-to/Guides/Tips
- Topic: 3rd Party Nozzles
- Replies: 2
- Views: 49025
Re: 3rd Party Nozzles
Matterhackers had several MG nozzle sizes in stock last time I looked
- Wed Jun 22, 2022 4:01 am
- Forum: General Discussion
- Topic: MakerGear Forum Shutting Down
- Replies: 11
- Views: 49044
Re: MakerGear Forum Shutting Down
If this forum goes dark, I have a functional copy for read only access. If you are interested, please pm me you email address so I can send you the link when it is online. I also grabbed the wiki.
Hopefully it won't go dark and my efforts will be for naught .
Doug
Hopefully it won't go dark and my efforts will be for naught .
Doug
- Mon Jun 20, 2022 3:30 pm
- Forum: General Discussion
- Topic: MakerGear Forum Shutting Down
- Replies: 11
- Views: 49044
Re: MakerGear Forum Shutting Down
Will this site http://makergear.wikidot.com/m2-technical-guide and Github also be doing away?