Thanks
Will work on the cube print to get it better results

Hi
I am using HatchBox 1.75 mm PLA will like to get good profile for S3D printer
regards Doron

Hi
Do you use Simplify software as your slicer . If yes can you send the profile you use
Thanks Doron

of course I mean +- 0.05 mm and not 0.5 mm (
Doron

Hi checked slicer's Extrusion Multiplier with the actual filament diameter and measured thin-wall square thickness and got the almost the some results for all walls (+-0.5 mm) is it good or not ? Disassemble into parts the extruder motor I don't find any problem i attach pictures maybe you can see s...

thanks
will check and see
Doron

Hi guys
I got 2 questions referring 2 pics attached
1) what is the case of some waves shown in print ?
2) the wires that are printed on bottom side of the print ( i use raft in the print )
Regards Doron

Hi
This was a problem in cable . i fixed it ,now print OK
Thanks for help
Doron

Hi guys , lately a got a strange rattling noise when i print .I thought that this is a motor problem so I order a new one . Installed it but the problem remains I try to dismount the drive gear but the problem is still .Any idea ?? I attach a link to video https://youtu.be/bW_r-4NdVXE Regards Doron

Hi guys, Sorry for return after so long time (some problems at home ) now back in printing . I notice that the cable to the extruder motor has a problem . 2 wires lose to my sorrow I had to order a new cable .Try to print today and i don't hear the rattle for now and the print is fine .Will try more...