** Pre-orders for MIC6 beds ** (FOR SALE NOW)
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
You probably ought to do a couple of batches a year.....as folks get new machines and get comfortable - they're gonna want to try the different plates.
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
Plate has arrived! Thank you kind sir.
Rich
Rich
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
Glad to hear it! I'm hoping they've survived USPS.
You guys may want to rinse them one final time before hairspraying.
You guys may want to rinse them one final time before hairspraying.
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
I'm getting initial reports that these are fitting very snugly. I use them on Rev E spiders and they kinda click-lock into place with the rubber, so it is a squeeze. A few downward strokes of a file in each corner will take out the slack, or I'd be happy to replace any bed that won't fit.
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
It's a very snug fit, but it works, makes good contact with the bed heater. Now I have to test it out with a print. . .
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
Mine arrived last night, looking great. I had to sweet-talk the Thingiverse bed clamps into fitting -- the plate is very snug -- but after a couple of tries and some well-chosen curses it worked fine.
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
Oh, make sure you guys are removing the protective film on the underside!
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
Had to knock the corners down a bit with a file but all is good.
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
Mine arrived, snug but workable fit, got PEI applied. Several prints later, everything's working great!
Well, one problem: a slightly loose Y-axis belt, unnoticed due to the light weight of the standard glass print bed, ruined a print by slipping a couple of teeth during a fast-moving infill. The Al bed is HEAVY. Tightened belt, should be OK now...
Well, one problem: a slightly loose Y-axis belt, unnoticed due to the light weight of the standard glass print bed, ruined a print by slipping a couple of teeth during a fast-moving infill. The Al bed is HEAVY. Tightened belt, should be OK now...
Re: ** Pre-orders for MIC6 beds ** (FOR SALE NOW)
I am interested to get one. Will there be another batch coming soon?