Larger print volume and heated enclosure

The place to discuss your hardware and software/firmware modifications...
Post Reply
User avatar
Tshulthise
Posts: 28
Joined: Wed Apr 09, 2014 8:44 pm

Larger print volume and heated enclosure

Post by Tshulthise » Mon Jan 27, 2020 8:40 pm

I modified my M2 about 6 years ago to have a 12.17" x 9.75 build area with a closed-loop feedback build volume. I think the z height is increased too. I got this almost to the finish line then ran out of gas. I tested it using a hairdryer for a heat source and it worked except the Y-axis was missing steps for some reason. I got burned out and quit working on it. I'm cleaning out my work area and want to pass it on.

Let me know if you are interested in any of the build details, Inventor CAD models, or if you want to purchase the machine.

Pictures and free drawings for the enclosure and modified parts are located here... www.shophacks.com/modifiedm2

Image
Image
Image

Post Reply