Interesting article

Other stuff you would like to discuss...
Post Reply
User avatar
Posts: 21
Joined: Sat Oct 22, 2016 12:02 am
Location: San Diego, CA

Interesting article

Post by Larry » Wed Nov 29, 2017 12:14 pm

Some interesting innovation here .. ... parts-1129

Posts: 213
Joined: Mon Mar 30, 2015 7:26 pm
Location: St Petersburg, FL

Re: Interesting article

Post by jferguson » Wed Nov 29, 2017 6:03 pm

The thing I found interesting was that they seem a bit challenged with cooling already printed layers. I've been printing R/C Airplane parts single thickness (0.35mm +/-) which are PLA and recommended extruder temp 230 and no cooling. The only way it can work without sagging is to print four or five sections at same time so last PLA layer can cool off before next one is layed down. I suppose they might be able to make it work if their temperature control is very good - no more heat than absolutely necessary and a well-focussed blower.

Post Reply